If your impact wrench isn’t working like it used to, there are a few things you can check before you throw it away. If you are experiencing low power in your air impact wrench, here are three easy steps.

The first problem could be a dirty intake bushing or air cleaner screen. Simply clean both with a suitable cleaning solution.

Next, examine the cylinder. Replace it if it is worn or broken or if the hole is scored or rippled.

Finally disassemble the tool and clean all parts with a suitable cleaning solution in a well ventilated area. Reassemble the tool according to the manual.

These three simple steps can solve low power problems most of the time. If your impact wrench isn’t impacting properly, try this.

Check and make sure the air tool has been properly lubricated. Lubrication is absolutely critical to keeping your air tools at peak performance. To remedy lack of lubrication, remove the hammer housing and lubricate the mechanism.

Once the hammer housing has been removed, inspect the impact wrench mechanism parts. Replace any broken or worn parts. Most manufacturers include detailed instructions on how to perform this procedure in the manual.

Here are some simple procedures that can extend the life of your impact wrench and restore it to its original working order.